goldsmiths • jewelers • gemologists




10 Things you should know before you go
shopping for that special Engagement ring:

by Richard W. Wise
©2006


1. Manufacturers are required to label gold according to its purity, Karat is an old standard that divides into 24 parts, 10k is 39%, 14k is 58% pure, 18k is 75% pure, 22k is 90% pure and 24k is 100% pure gold.

   2. Platinum is not labeled in Karats but by percentage of purity. In the United States the percentage of metal must be at least 90% before a ring can be legally labeled platinum.

   3. A platinum ring to cost at least twice the price of the same ring in 14k gold. Why, platinum has greater density, a one inch cube of platinum weighs 40% more than an identical cube of pure gold. Platinum is currently priced at about twice the gold price, it is used 90% pure and it is more difficult to work with.

   4. Today wedding rings are available in a variety of finishes, polished, buff and sandblasted. Will they last? In a word, no, precious metals are relatively soft. If you buy polished and she wants buff, they will both look about the same in a couple of years. Like your relationship, the longer you are together the more alike you become.

   5. Durability: Gold is the most plastic of metals but, platinum is the more durable. However, a heavy, high quality ring made of either metal should last for many years.

   6. 18k is the aristocrat of golds. Some U. S. jewelers will often tell you it is too soft. Though a tad softer than 14k, over the years, 18k will develop a rich buttery patina. Like your relationship if it is of quality, it should grow richer and more beautiful with age.

   7. Be careful when gem set rings. Many of this type are manufactured offshore. They are cast all in one piece and the prongs that hold the stones are soft. Ask your jeweler. A yellow gold ring with yellow prongs set with white diamonds should be viewed with suspicion. High quality rings are made in two parts with tempered die-struck prongs soldered in place. For diamonds, the prongs should be white. Beware of deals that sound too good to be true. After you replace a few stones, your great deal may turn into your worst nightmare.

   8. Want a unique design to symbolize your unique relationship. Consider a handmade original design. Expensive? Most handmade rings are made by a goldsmith and sold directly to the consumer. Most commercially made rings pass through several hands before reaching yours gathering markup all along the way so handmade may be a better value for your money and, often the craftsman will do the design work for free. Remember these rings the single most enduring symbol of your love. You will wear them for many years while the wedding gown gathers mothballs in your closet. You should love them!

   9. Should I buy an antique ring? By definition an antique has been around a long time. Art-Deco period rings made in the 1920s are very popular today. When you buy an antique you become its custodian. Jewelers will usually not warranty antique pieces. Be sure to check. Remember these rings were made for women who lived a less active lifestyle. Be practical! That delicate lacey design will not last long on a woman who’s hobby is rock climbing.

  10. If you don’t know the product, know your jeweler. What you don’t want is a pretty face in a pin-striped suit. Ask questions, if you don’t like the answers, move on. If you are shopping for gems, seek out a Graduate Gemologist with a diploma from the Gemological Institute of America.
paperback2.jpg

Want to learn more secrets of judging the quality of gemstones? 
Consider "Secrets of The Gem Trade, The Connoisseur's Guide To Precious Gemstones". 

Read a free chapter and become your jeweler's worst nightmare: www.secretsof the gemtrade.com 
Buy now on Amazon.com